ER-Collet with cooling channels ER40 | 472ECC | < 15µm | Ø 16Application: For mounting straight shank tools in collet chucks DIN 6499. Note: Only nominal size d can be clamped, with cooling channels. In order to achieve an optimum sealing the tool must be clamped on the complete length of the ground drill of the collet. (applicable up to 21 bar)

- Warranty card

For safe clamping of taps in end mill holders according to DIN 1835 B

Upon switching on the display will read the actual absolute measuring position

Synchro tapping chucks compensate synchronisation errors

With mechanical booster

Carbide tipped measuring faces

- Preset real position value

bei Ø 6 – Ø 32 mm = h235

T-nuts 18 mm

5 with h4-tolerance and Ø 6 – Ø 32 with h6-tolerance

lockable in different positions

The internal thread provided for the coolant tube in the PSC toolholder is plugged with the socket-head screw incorporated in the adapter