ER-Collet with seal for IC ER16 | 426 EH | < 15µm | Ø 3Application: Collets sealed for high pressure cooling 120 bar with IC DIN 6499 B (ISO 15488 B) ER system Note: Only nominal size d can be clamped (applicable up to 120 bar). In order to achieve an optimum sealing the tool must be clamped on the complete length of the ground drill of the collet.

internal diameters

Measuring contact points are designed to allow measurements near to the bottom of blind holes

ISO-Metric Thread

driving ring and feather key

Extra large LCD readout

PSK = PSK 63

Adapters HSK / PSK with axial clamping

chip breaking

Dragged-in prism

10mm for 300mm/12" range

Wherever reduced interference contours are required

Nubs on the top of the inserts