Edge finder electronic 3D 20 - 106 - 10Application: Alignment of component reference surfaces or edges. Determination of bore centres to the machine spindle. Note: The spring mounted spherical tip protects the unit from damage if contact is too strong. Functional parts hardened and ground. Concentricity: 0. 01 mm. When contact between the spherical tip and metal component occurs, the control lamp lights up = identification of the reference point.

Without the illustrated cutting tools

Surface roughness Ra < 0

For retaining screw DIN 6367

Hardened and grinded all around

For horizontal clamping of flat workpieces

Collets sealed with seal for IC

accuracy: 0

2 x 53 x 18

Zero setting at any position

- Auto/manual shutdown

load capacity 200kg

- in case/box