Iron ores. Determination of hygroscopic moisture in analytical samples. Gravimetric, Karl Fischer and mass-loss methods1 Scope This International Standard specifies the following four test methods for the determination of the hygroscopic moisture content of test samples: Method 1 Gravimetric method; Method 2 Karl Fischer volumetric method; Method 3 Karl Fischer coulometric method; Method 4 Mass loss method. Any of these methods is applicable wherever the analytical value of a chemical constituent is to be calculated to a dried sample basis in the following ore types.

With obedience and compliance to BS 6888

Prevention of fire caused by arson

The hermetic solder mount receptacle has the smallest mounting footprint available

Why should you use BS 6476 - Garment quality

Electronic engineers / Electrical engineers

There is also a list of additional principles for all non-IVD medical devices

for international exchange and for conveyance by road

UK passports and UK ID cards*

BS EN 17176-1 is applicable to piping systems intended for the supply of water with a maximum allowable operating pressure (PFA) up to and including 25 bar1)

and is compliant with the applicable European legislation

The differences between dynamic stiffness values measured with a static load of 2 kPa in accordance with this part of ISO 9052 and those measured with a very low preload are of the order of 10 % to 20 %

• Symbols and abbreviations