Management of observed hydrometric data. Recommendations1 Scope This document gives recommendations for the management of observed hydrometric data, including raw data and other data as well as statistics derived from these observations. Although the principles of data management can be applied to all hydrometric observations, particular focus is placed on measurements of precipitation, water level (including stage), volume and discharge in open channels. NOTE The range of sites where water levels, and

To ensure that the foam system does not penetrate areas of the building where its presence could be deleterious

BS 4553-3 guidelines specify requirements for construction and describe methods of test for XLPE-insulated single-phase split concentric cables for operation on an earthed neutral system at nominal voltages up to and including 1 000 V between phases and 600 V to earth

Why should you use BS EN 15586 - Methods of testing fibre proof properties of fabrics

BS EN 817 specifies caracteristics with which mechanical mixing valves need to comply

BS EN 60546-1 is intended to specify uniform methods of test for evaluating the performance of industrial-process PID controllers with analogue input and output signals

65 mm(120 ml)

BS AU 209-3:1988 specifies requirements for the security marking of the glazing fitted to passenger cars and car derived vehicles

Define the wire representation of the service primitives defined in IEC 61158-5-8

Designation of alloyed aluminium ingots for remelting

— provides information to ensure that the data encoded in the bar code symbology and RFID data carrier are synchronous

BS EN 60317-46 covers the characteristics like electrical resistance

Correction of Equations (1)