SYNERGY 100-3-NO107 - RENOLD 1 1/4 Inch Pitch Synergy LinkFor use with all sizes and types of chain where optimum security is desired. The link is supplied with bearing pins riveted into one outer plate. The other outer plate is an interference fit on the bearing pins, the ends of which should be riveted over after the plate is fitted. Press fit connecting links should only be used once; new links must be used to replace dismantled links. (See Riveting Chain Endless' for full instructions).

self-lubricating sliding surfaces have to be externally protected from contaminants Open Type Normal Radial Internal Clearance

This LPB30 bearing is a Pressed Steel Pillow Block Unit

This NU2215-E-M1-C3 bearing is a single row cylindrical roller bearing

This 6814DD bearing is a Sealed Thin Section Deep Groove Radial Ball Bearing with a standard radial internal clearance

This 71913ACD/P4ADGB bearing is a Super Precision angular contact bearing with a 25° contact angle and a high capacity design

This helps to enhance performance and ultimately extend the bearing’s lifespan

This MLC5C3R120T1HS2 is a maintenance free miniature ball type series linear way with a rail length of 120mm

23 20 M C3 Extra Wide 100mm - Bore Size Cylindrical Bore Open Type Solid Brass Cage Radial Internal Clearance Larger Than Normal

The dimensions of the SKF N320ECP bearing are 100x215x47mm

H 312 Adapter Sleeve dimensions in accordance with ISO standard

Extra Light 100mm - Bore Size Metal Shields on Both Sides of Bearing Internal Clearance Greater Than Normal

Taper Roller Bearings consist of the inner ring with the roller cage containing the tapered rollers known as the cone