M1-Hanging Vibration Isolator Mount (12 - 180 daN)M1 Hanging Vibration Isolator Mount Overview The Vibrostop M1 Hanging Vibration Isolator Mount is a spring suspension mount that meets the requirements of the ASHRAE manual for isolating components of ventilation and air conditioning (HVAC) systems suspended from ceilings (pipes, ducts and heat exchangers). The spring element housed within the steel bracket allows deflections of up to 27 mm, with suspension frequencies comparable to those of normal

14 SPR-A-114

In some applications this is the primary reason for product failure

Very few of these are triple bonded as they are a niche product

so lead times for these products are 3 - 10 weeks depending on when they are ordered - holiday periods have extended lead times

8 Spr-V-M5-BP-730 730 50

Loads are in daN (Deca Newtons

When fully loaded it will deflect by >10mm (for vibration related applications)

Whilst this product can tolerate vibration in all directions

The failsafe aspect to the structure means that if the rubber disintegrates the structure will not immediately fall apart - there is a mechanical backup holding the structure together

excellent structural noise attenuation

capable of isolating loads of up to 20 metric tonnes per mount

Key Features & Benefits: