BP485-52 | BP485 Absorptive Visible Bandpass/Near-IR Block FilterThe MidOpt BP485 52 is commonly used as an internal infrared blocking filter in cameras. When working with any camera that has had its internal filter removed, a mounted BP485 filter can also be considered, which, when desired, allows it to work like the unmodified camera. BP485 is A R coated on both sides, and its spectral response in the blue portion of the spectrum is excellent compared to other absorptive IR blocking filters. Technical

39 mm ø FoV @ 2/3″ 61

It is available with Smart Vision Light's MultiDrive driver for constant on or strobe operation

The LW300-395-W is Not Diffused and Not Polarized

The MidOpt LP341-27 filter is similar to LP340 antireflection-coated protective windows

55 Angle of View @ 2/3″ 54

MVD-TRM-021-001

The LCZE300-470-LPI-DC is Polarized

The LSRB900-940 can be mounted using the PB300-M5 (2 recommended) Swivel Mount Bracket Kit

The LM150-625-W compact linear light features SVL's integrated Multi-Drive constant-current driver that operates in continuous operation or in OverDrive strobe mode depending on the wiring method

2 MP Resolution WxH 2048 x 1536 px Frame Rate/Line Rate 119 fps ROI Yes Interface USB3 Vision (PoUSB) Sensors 1xCMOS Sensor Model IMX252 Optical Format 1/1

APG 25R-AH

Specifications + Useful Range Min 380 nm Useful Range Max 585 nm Stabledge Yes FWHM 285 nm Adhesive Backed Yes Tolerance 10 % Peak Transmission ≤ 90 % Surface Quality (Scratch-Dig) 40-20 Substrate Material Colored Glass Filter Diameter M82 x P0