Black Water Soluble Aniline Wood Dye Powder - 1oz, 28gTo dissolve we recommend using hot, but not boiling, water. Always start by putting the water into a suitable glass, plastic (HDPE) or ceramic container, and then gradually add the powder. Stir the solution while adding, and then stir occasionally over the course of 10 15 minutes to ensure all powder is dissolved. Allow to cool before use. The mixed stain can be applied to wood with a sponge, cloth or brush. These 28g (1oz) packets will create: 2

Power Gouge Set is a great value and contains a wide selection of tools for roughing out to detailing

Using a 75:25 mixture of Shellac & Aniline Thinners and Acetone can help to dissolve the solution in to nitrocellulose lacquer

This lacquer has colour to it but will still allow the grain pattern to show through

Palm Tools included: FR308 #2 x 5/16"

each 5" (about 125mm) long

FR305 #3 x 3/8"

It should be used after our RF3 fine grade liquid abrasive

MC309 #9 x 1/2"

while refills of the inidividual sheets of wet/dry paper are available separately through our shop

Allow to cool before use

Always start by putting the solvent into a suitable glass

All are of the same softness