Alpha HSS Tap UNF Taper 7/16x20 UNFHT7167 16x20 TAPER taps have a lead of eight threads and are used as a starting tap in difficult or high precision holes. Alpha Taper taps can be identified by the single ring on the shaft near the driving square. Diameter: 7 16mm Pitch: 20mm Overall length: 63mm Shaft Diameter: 8mm Drive Square: 6. 2mm Tapping Drill Size: 9. 90mm Weight (gr) 35. 00

Countersink 5 Flute 8mm

such as high humidity/salt air

Suitable in Wet or Dry Conditions

The axle diameter is 25mm

Inner Diameter: 8mm

• 230W Induction Motor- is quiet and efficient to run

lining tanks

CRC Urethane Seal Coats are stable single component polyurethane coating that dries fast

CRC Food Grade Silicone is a multi-purpose dry film silicone spray for use on food processing and handling equipment

Stainless Steel Countersunk Screws and Nuts 3/16” x 1-1/2” Set of 4

0005”) resolution

000psi (828bar) • 450g capacity • Suitable for all grease grades up to NLGI3 • Twin Lock System seals the piston and eliminates the possibility of dummy lubrication • 4 jaw coupler & rigid extension • Coarse thread on barrel assembly eliminates the possibility of cross threading • Three way loading • High volume